Hardwire Cord
USD$ 9.95

This 10-foot cord provides a permanent power source for your detector. The bare wires on the end of the cable can be connected to the fuse box or even directly to the battery. It includes an integral fuse holder.  Works with all Cobra radar models.

Will this work with a spx555 or spx5500? Also would i need to buy an inline fuse or is it included in the wire? 

Asked by: jesus915
Please note, this hardwire kit works with all Cobra radar detectors and it includes a 1A inline fuse. To see other frequently asked questions visit: https://www.cobra.com/support/faqs Should you have additional questions please contact our Customer Care Group at 773 889 3087. Thank you for choosing Cobra!
Answered by: Jorge
Date published: 2015-05-28

Will this work for the Drive HD CDR 840 dash cam?

Asked by: Kraemer
No. Above cord is 12V. The CDR840 power cord has a 5V output. To see other FAQ's visit: https://www.cobra.com/support/faqs Should you have additional questions, please contact our Customer Care Group at 773 889 3087. Thank you for choosing Cobra!
Answered by: Jorge
Date published: 2015-04-14

What is the volt and amp requirement and tip size. I would like to connect via a usb (5 volt limited).  This is for irad 900. 

Asked by: GArnold
Please note, all Cobra radar detectors require a 12VDC, 1A input. (center-tip positive). To see other frequently asked questions click here: https://www.cobra.com/support/faqs Should you have additional questions, please contact our Customer Care Group at 773 889 3087. Thank you for choosing Cobra!
Answered by: Jorge
Date published: 2015-02-16

Will this work if hard wired to an auto dimming rear view mirror?

Asked by: Dillon
If the voltage on the mirror is 12V, (1A or higher), it should work. To see other frequently asked questions click here: https://www.cobra.com/support/faqs Should you have additional questions or require warranty service, please contact our Customer Care Group at 773 889 3087. Thank you for choosing Cobra!
Answered by: Jorge
Date published: 2015-01-21

Hi Cobra,      Just have few question. First is this hardwire can be use on SPX 7700? Another question on my fuse box i just see 7.5A as the lowest fuse i have found. Is this ok if i plug it in ?

Asked by: michael chak
1. Yes, this power cord works with all Cobra radar models. 2. The size (amps) of the fuse in the vehicle does not matter, the radar will only take the (1A) required to operate. We recommend connecting it to the ignition fuse or the stereo fuse if you want your radar to turn on/off with the ignition. To see other frequently asked questions on radar detectors click here: https://dev.cobra.com/support/faqs/radar-detector-faqs
Answered by: Jorge
Date published: 2014-09-08

Will this work with the HH ROADTRIP? If not, is there something similar that will?

Asked by: Tim C
No, the above power cord is only for radar detectors. To see a power cord compatible with the HH Road Trip CB radio click here: https://www.cobra.com/products/cb-radio/420-017-n-001
Answered by: Jorge
Date published: 2014-09-02
  • 2015-05-29T07:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_RAPSCB, PRD, sort_recentAnswersFirst
  • clientName_cobra

Product Support

There are currently no Frequently Asked Questions for this product. Ask the expert.

There are currently no videos for this product. Browse our product videos.